| Condition: | New |
|---|---|
| Customized: | Customized |
| Certification: | ISO9001 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Magnetic heating Agitator teaching equipment
Product Introduction
The magnetic heating Agitator consists of a host, a stirrer, a pole and so on.
Product Specification
| Product name | magnetic heating Agitator |
| Operating Voltage | 220V/50Hz |
| Motor Power | 25w |
| heating power | 150w |
| Stepless speed regulation | 0~2000r/min |
| Size | 235×165×130mm |
How to use:
When using this instrument, first check whether the random accessories are complete, then install the fixtures in order, put the beaker to be stirred in the metal plate, add the solution, put the stirrer in the beaker solution, and then plug the power cord of the instrument. Plug in 220V AC power, turn on the power switch, the power indicator light is on, the stirring motor starts to work, gradually adjust the speed control knob from low speed to high speed, and do not allow the high speed gear to start directly, so as to avoid the agitator being out of sync and causing beating. After the stirring bar runs normally, turn on the heating switch to heat the beaker. It cannot be heated when it is not stirring. The heating is controlled by the switch. When it is not working, the power supply should be cut off, and the speed control knob should be returned to the lower speed position.
Product feature and application
Magnetic heating Agitator is widely used in colleges and universities, environmental protection, scientific research and health, epidemic prevention, petroleum, metallurgy, chemical industry, medical and other units.
The instrument has good performance, no noise, no vibration, and remarkable stirring effect. It is an ideal tool for laboratory laboratory personnel.
Maintenance and precautions
1. To ensure safety, please connect the ground wire when using.
2. The instrument should be kept clean and dry, and it is strictly forbidden for the solution to enter the machine to avoid damage to the parts.
3. When you find that the stirrer jumps or does not stir during stirring, please cut off the power supply to check whether the bottom of the beaker is flat and the position is correct, and at the same time, please check whether the current voltage is within the normal range, otherwise the above situation will occur.
4. Generally, the heating time should not be too long, and the interval use can prolong the service life.
5. It can work continuously for 8 hours in medium speed operation and 4 hours in high speed operation.
){kind=link}