Power Supply High School Teaching Power for School Lab (Physical Instrument)

• Condition: Used
• Customized: Customized
• Certification: ISO9001
• Model NO.: 04006
• Type: Educational Equipment
• Transport Package: Carton Box
• Specification: As shown in the figure
• Trademark: SHUN MA / OEM
• Origin: Yuyao Zhejiang China
• HS Code: 9023000000
• Production Capacity: 50, 000PCS/ Month

Product Description

Product Description

Power Supply High school teaching power for School Lab (Physical Instrument)

High school teaching power:
The power supply for school lab is mainly used as a low-voltage AC and DC regulated power supply for high school physics teaching experiments. Among them, the DC large current short-time output is specially used for electromagnetic teaching experiments, and the output has an overload protection function, which will automatically shut down when the output is overloaded. And can start the experimental electrical appliances with large instantaneous starting current such as incandescent lamps not greater than the rated current


Product Specification
 

Model	Junior high school student power supply	Junior high school teaching power supply	High school student power	High school teaching power
Output voltage	1.5V-9V DC regulated output, six gears	1.5V ,3V ,4.5V ,6V ,9V ,12V ,regulated output,six gears	1.5, 2, 3... 16V single and double selection sixteen gears adjustable	2~24V, one gear per 2V, a total of 11 gears can be adjusted
Rated current	1.5A	2A	2A	2V-6V,12A 8V-12V,6A 12V-24V,3A
Voltage stability	Each gear is not more than 350mV	Each gear is not more than 350mV	The output of each gear is not more than 2%U standard +0.1V	The output of each gear is not more than 2%U standard +0.1V
Current stability	Each gear is not more than 350mA	Each gear is not more than 350mA	---	---
Ripple voltage	Each gear is not more than 15mV	Each gear is not more than 15mV	When each gear is fully loaded, it is not more than 0.1% U mark	When each gear is fully loaded, it is not more than 0.1% U standard + 5MV
Protection	With overcurrent protection	Between IХ (1.05-1.6), automatic protection	When the output current is between 1.05 and 1.5 times of the rated current, the output can be automatically turned off	When the output current is between 1.05 and 1.5 times of the rated current, the output can be automatically turned off
Ambient temperature	0~40ºC	0~40ºC	0~40ºC	0~40ºC
Relative humidity	≤80%(40ºC)	≤80%(40ºC)	≤90%(40ºC)	≤85%(40ºC)
voltage	150 V~248V,50Hz	220V±10%	220V±10% 50Hz±5%	220V±10% 50Hz±5%
operating hours	continuous	Continuous voltage regulation (except 40A, 5A)	Working continuously for not less than 8 hours	Working continuously for not less than 8 hours

Product feature and application
This power supply for school lab is mainly used as a low-voltage AC and DC regulated power supply for junior high school and high school physics teaching experiments.

Maintenance and precautions
1. The power supply should be stored in a dry and ventilated place without corrosive gas to prevent the device from being damp, corroded and reduced in insulation.
2. The power supply should be used within the rated load, and overloading is strictly prohibited.
3. When using the pressure regulating switch, it should be gradually changed from low to high to avoid damage to the experimental circuit due to overvoltage or overcurrent.
4. When the instrument is fully loaded and used continuously for a long time, the circuit chip of the instrument may be protected due to overheating. In this case, the load can be reduced or the internal temperature can be lowered before enabling it.
 

Detailed Photos